User Manual

3
or to the required Quick Text and press
to select.
4 Use the keypad to edit the message, if required.
Press to move one space to the left. Press or
the key to move one space to the right.
Press the
key to delete any unwanted
characters. Long press to change the text
entry method.
5
Press once message is composed.
6 Depending on whether you want to send, save, re-
edit, or delete the newly composed message, do
one of the following.
•
or to Send, and press to send the
message.
•
or to Save, and press to save the
message to the Drafts folder.
•
to edit the message.
•
again to choose between deleting the
message or saving it to the Drafts folder.
7 If you are sending the message, select the
recipient by
•
or to the required alias or ID and press
to select.
•
or to Manual Dial, and press to
select. The first line of the display shows Radio
Number:. The second line of the display shows
a blinking cursor. Key in the subscriber alias or
ID and press
.
The display shows , the transitional mini notice,
confirming your message is being sent.
If the message is sent successfully, a tone sounds
and the display shows
the positive mini notice.
If the message cannot be sent, a low tone sounds
and the display shows the negative mini notice.
Advanced Features in Non-Connect Plus Mode
104
English