User Manual

7
or to the required tone and press to
select.
appears beside selected tone.
Selecting a Ring Alert Type
Note:
The programmed Ring Alert Type button is
assigned via CPS. Check with your dealer or
system administrator to determine how your
radio has been programmed.
You can program the radio calls to one
predetermined vibrate call. If All Tones status is
disabled, the radio displays the All Tone Mute icon.
If All Tones status is enabled, the related ring alert
type is displayed.
The radio sounds one vibration if it is a momentary
ring style. The radio vibrates repetitively if it is a
repetitive ring style. When set to Ring and Vibrate,
the radio sounds a specific ring tone if there is any
incoming radio transaction (for example, Call Alert or
Message). It sounds like a good key tone or missed
call. If the notification list is not empty, the radio
repeats a vibration every 5 minutes.
You can select a Ring Alert Type by performing one
of the following actions.
• Press the programmed Ring Alert Type button to
access the Ring Alert Type menu.
a)
Press or to Ring, Vibrate, Ring &
Vibrate or Silent and press to select.
• Access this feature via the menu.
a)
Press to access the menu.
b)
Press or to Utilities and press
to select.
c)
Press
or to Radio Settings and
press to select.
d)
Press or to Tones/Alerts and press
to select.
e)
Press or to Ring Alert Type and
press to select.
f)
Press or to Ring, Vibrate, Ring &
Vibrate or
Silent and press
to select.
Advanced Features in Connect Plus Mode
212
English