User Manual

2
or to Scan and press to select.
3
or to Set Active List and press to
select.
4
or to the required list and press to
select.
The list selected will be your active scan list.
Starting and Stopping Scan
While scanning, the radio will only accept data (e.g.
text message, location, telemetry,
or PC data) if
received on its Selected Channel.
1
to access the menu.
2
or to Scan and press to select.
•
The display shows Turn On if scan is disabled.
•
The display shows Turn Off
if scan is
enabled.
3
Press to select.
• The LED blinks yellow and the Scan icon is
displayed, when Scan is enabled.
• The LED turns off and the Scan icon is not
displayed, when Scan is disabled.
Responding to a Transmission During a Scan
During scanning, your radio stops on a channel/group
where activity is detected. Your radio unmutes and
the incoming call sounds through the radio's
speaker.The radio stays on that channel
while the
activity is present and for a programmed time period
known as “hang time”.
1 Hold the radio vertically 1 to 2 inches (2.5 to 5.0
cm) from your mouth.
If the Channel Free Indication feature is enabled,
you hear a short alert tone the moment the
transmitting radio releases the PTT button,
indicating the channel is free for you to respond.
2 Press the PTT button during hang time.
The LED lights up solid green
.
3 Wait for the Talk Permit Tone to finish (if enabled)
and speak clearly into the microphone.
4 Release the PTT button to listen.
Advanced Features in Non-Connect Plus Mode
74
English