User Manual

Table Of Contents

Radio

Control

Steps

radio displays the alias that is listed

first in the list.

Press to select.

or to Edit Priority and press to

select.

or to the required priority level and press

to select.

The display shows Entry Saved before returning

to the previous screen.

Note:

The Priority icon appears left of the name

of the member.

There is no Priority icon if priority is set to

None.

Scan

When you start a scan, your radio cycles through the

programmed scan list for the current channel looking

for voice activity.

The LED blinks yellow and you see the Scan icon on

the display

There are two ways of initiating scan:

• Main Channel Scan (Manual): Your radio scans

all the channels/groups in your scan list. On

entering scan, your radio may (depending on the

settings) automatically start on the last scanned

“active” channel/group or on the channel where

scan was initiated.

• Auto Scan (Automatic): Your radio automatically

starts scanning when you select a channel/group

that has Auto Scan enabled.

Note:

This feature is not applicable in Capacity Plus

and Linked Capacity Plus.

Setting an Active Scan List

to access the menu.

Advanced Features in Non-Connect Plus Mode

English