User Manual

Each zone provides a Contact List with up to 100
contacts. The following contact types are available:
• Private Call
•
Group Call
• Multigroup Call
• Site All Call Voice
• Site All Call Text
• Dispatch Call
The Dispatch Call contact type is used to send a text
message to a dispatcher PC through a third-party
Text Message Server.
Making a Private Call from Contacts
1
to access the menu.
2
or to Contacts and press to select.
The entries are alphabetically sorted.
3 Use one of the steps described next to select the
required subscriber alias:
• Select the subscriber alias directly.
•
or to the required subscriber alias or
ID.
•
Use the Manual Dial menu.
•
or to Manual Dial and press to
select.
• If there was previously dialed ID, the ID
appears along with a blinking cursor. Use
the keypad to edit/enter the ID. Press to
select.
4 Hold the radio vertically 1 to 2 inches (2.5 to 5.0
cm) from your mouth.
5 Press the PTT button to make the call.
The LED lights up solid green.
6 Wait for the Talk Permit Tone to finish (if enabled),
and speak clearly into the microphone.
7 Release the PTT button to listen.
When the target radio responds, the LED blinks
green and the display shows the transmitting
user's ID.
Advanced Features in Connect Plus Mode
208
English