User Manual

Auto-Range Transponder System (ARTS)
ARTS is an analog-only feature designed to inform
you when your radio is out-of-range of other ARTS-
equipped radios.
ARTS-equipped radios transmit or receive signals
periodically to confirm that they are within range of
each other. Your dealer can program your radio to
transmit or receive the ARTS signal.
Your radio provides indications of states as follows:
• First-Time Alert – A tone sounds.
• ARTS-in-Range Alert – A tone sounds, if
programmed.
• ARTS-Out-of-Range Alert – A tone sounds, the
LED rapidly blinks red.
Over-the-Air-Programming (OTAP)
Your radio can be updated by your dealer remotely,
via OTAP, without needing to be physically
connected. Additionally, some settings can also be
configured via OTAP.
While undergoing OTAP, the LED blinks green
.
Note:
When the radio is receiving high volume data,
the High Volume Data icon appears and
channel is busy. A PTT button press at this
time may cause a negative tone to sound.
Once the programming is complete, a tone sounds,
and your radio restarts (powers off and on again).
Wi-Fi Operation
Wi-Fi
®
is a registered trademark of Wi-Fi Alliance
®
.
Note:
This feature is applicable to XPR 3300e
only.
This feature allows you to setup and connect to a Wi-
Fi
®
network. Wi-Fi supports updates of radio
firmware, codeplug, and resources such as language
packs and voice announcement.
Turning Wi-Fi On or Off
Note:
This feature is applicable to XPR 3300e
only.
The programmed Wi-Fi On or Off button is
assigned via CPS. Check with your dealer or
system administrator to determine how your
radio has been programmed.
Advanced Features
50
English