User Manual

Accessing the Radio from Password
1 Power up your radio.
You hear a continuous tone.
2 Use the Channel Selector Knob to enter the first
digit of the password.
3 Press Side Button 1 or 2 to enter each digit of the
remaining three digits of the password.
•
Enter your current four-digit password with the
radio’s keypad. The second line of the display
shows
. Press to proceed.
• Enter your current four-digit password. Press
or to edit each digit’s numeric
value. Each digit changes to . Press to move
to next digit. Press to confirm your
selection.
You hear a positive indicator tone for every digit
entered. When the second digit of the password is
entered, your radio ignores any Channel Selector
Knob position change. When the last digit of the
four-digit password is entered, your radio
automatically checks the validity of the password.
If the password is correct, your radio proceeds to
power up. See Powering Up the Radio on page
16
.
If the password is incorrect, you hear a continuous
tone. Repeat Steps 2 and 3.
After the third incorrect password, your radio
enters into locked state. A tone sounds and the
LED double blinks yellow.
Your radio enters into locked state for 15 minutes,
and responds to inputs from On/Off/Volume
Control Knob only.
Note:
The radio is unable to receive any call,
including emergency calls, in locked state.
Unlocking the Radio from Locked State
1 If your radio was powered down after being in the
locked state, power up the radio.
A tone sounds and the LED double blinks yellow.
2 Wait for 15 minutes.
Your radio restarts the 15 minutes timer for locked
state when you power up.
Advanced Features
48
English