User Manual

Making and Receiving Calls
Selecting a Channel
Transmissions are sent and received on a channel.
Depending on your radio’s configuration, each
channel may have been programmed differently to
support different groups of users or supplied with
different features. You can select the relevant
channel required to transmit or receive on.
Turn the Channel Selector Knob to select the
number that represents the channel, subscriber
ID, or group ID.
Receiving and Responding to a Radio Call
Once the channel, subscriber ID, or group ID is set,
you can proceed to receive and respond to calls.
The LED lights up solid green while the radio is
transmitting and blinks green when the radio is
receiving.
Note:
The LED lights up solid green
while the radio
is transmitting and blinks greenrapidly when
the radio is receiving a privacy-enabled call
and blinks green when receiving a non-
privacy-enabled call.
To unscramble a privacy-enabled call, your
radio must have the same Privacy Key, OR
the same Key Value and Key ID (programmed
by your dealer), as the transmitting radio (the
radio you are receiving the call from).
See Privacy on page 46 for more
information.
Receiving and Responding to a Group Call
To receive a call from a group of users, your radio
must be configured as part of that group.
The LED blinks green. Your radio unmutes and the
incoming call sounds through the radio's speaker.
1 Hold the radio vertically 1 to 2 inches (2.5 to 5.0
cm) from your mouth.
Making and Receiving Calls
27
English