User Manual
Table Of Contents
- Contents
- Declaration of Conformity
- Important Safety Information
- Software Version
- Computer Software Copyrights
- Handling Precautions
- Getting Started
- Preparing Your Radio for Use
- Identifying Radio Controls
- Identifying Status Indicators
- Making and Receiving Calls
- Advanced Features
- Authorized Accessories List
- Batteries and Chargers Warranty
- Limited Warranty
- Blank Page
2 To remove the antenna, turn the antenna
counterclockwise.
Attaching the Belt Clip
1 To attach the belt clip, align the grooves on the
clip with those on the battery and press downward
until you hear a click.
2 To remove the belt clip, press the belt clip tab
away from the battery using a key. Then slide the
clip upward and away from the radio.
Attaching the Universal Connector Cover
(Dust Cover)
The universal connector is located on the antenna
side of the radio. It is used to connect MOTOTRBO
accessories to the radio.
1
2
3
Insert the slanted end of the cover into the slots
above the universal connector. Press downward on
the cover to seat the dust cover properly on the
Universal Connector.
Secure the dust cover to the radio by pushing the
latch upwards.
Preparing Your Radio for Use
14
English