User Manual

Table Of Contents

or to and press to select.

Press to select.

or to Edit Priority and press

to select.

or to the required priority level and

press

to select.

The display shows before returning to the previous

screen.

Note:

The Priority icon appears left of the name

of the member.

There is no Priority icon if priority is set to

None.

Scan

When you start a scan, your radio cycles through the

programmed scan list for the current channel looking

for voice activity.

The LED blinks yellow.

There are two ways of initiating scan:

• Main Channel Scan (Manual): Your radio scans

all the channels/groups in your scan list. On

entering scan, your radio may (depending on the

settings) automatically start on the last scanned

“active” channel/group or on the channel where

scan was initiated.

• Auto Scan (Automatic): Your radio automatically

starts scanning when you select a channel/group

that has Auto Scan enabled.

Note:

This feature is not applicable in Capacity Plus

and Linked Capacity Plus.

Starting and Stopping Scan

1 Use the Channel Selector Knob to select a

channel programmed with a scan list.

to access the menu.

or to Scan and press to select.

Advanced Features

English