User Manual

• Select the channel with the active group alias
or ID. See Selecting a Channel on page 34.
•
Press the programmed One Touch Access
button.
2 Hold the radio vertically 1 to 2 inches (2.5 to 5.0
cm) from your mouth.
3 Press the PTT button to make the call.
The LED lights up solid green. The first text line
shows the group call icon. The second text line
shows the group call alias.
4 Release the PTT button to listen.
When the target radio responds, the LED blinks
green
. You see the Group Call icon, the group
alias or ID, and transmitting radio alias or ID on
your display.
5
If the Channel Free Indication feature is
enabled, you hear a short alert tone the moment
the transmitting radio releases the PTT button,
indicating the channel is free for you to respond.
Press the PTT button to respond.
If there is no voice activity for a predetermined
period of time, the call ends. Radio returns to the
screen you were on prior to initiating the call.
Making a Private Call
While you can receive and/or respond to a Private
Call initiated by an authorized individual radio, your
radio must be programmed for you to initiate a Private
Call.
There are two types of Private Calls. The first type,
where a radio presence check is performed prior to
setting up the call, while the other sets up the call
immediately.
Only one of these call types can be programmed to
your radio by your dealer.
You will hear a negative indicator tone, when you
make a Private Call via the One Touch Access
button, the programmed number keys, or the Channel
Selector Knob, if this feature is not enabled.
1 Do one of the following.
• Select the channel with the active subscriber
alias or ID. See Selecting a Channel on page
34.
Making and Receiving Calls
39
English