User Manual

Selective Call or Alert with Call. Your radio
unmutes and the incoming call sounds through the
radio's speaker.
1 Hold the radio vertically 1 to 2 inches (2.5 to 5.0
cm) from your mouth.
2 Press the PTT button to respond to the call.
The LED lights up solid green.
3 Wait for the Talk Permit Tone to finish (if enabled),
and speak clearly into the microphone.
4 Release the PTT button to listen.
If there is no voice activity for a predetermined period
of time, the call ends.
The display shows Call Ended.
See Making a Private Call on page 39 for details on
making a Private Call.
Making a Radio Call
After selecting your channel, you can select a
subscriber alias or ID, or group alias or ID by using:
• The Channel Selector Knob.
• A programmed One Touch Access button (see
Making a Phone Call with the One Touch Access
Button).
• A programmable button – This method is for
Phone Calls only (see Making a Phone Call with
the Programmable Phone Button).
• The Contacts list (see Contact Settings on page
53).
Note:
Your radio must have the Privacy feature
enabled on the channel to send a privacy-
enabled transmission. Only target radios with
the same Privacy Key OR the same Key Value
and Key ID as your radio will be able to
unscramble the transmission.
Note:
See Privacy on page 67 for more
information.
Making a Group Call
To make a call to a group of users, your radio must
be configured as part of that group.
1 Do one of the following.
Making and Receiving Calls
38
English