User Manual

Table Of Contents
Powering Up the Radio
A
Rotate the On/Off/Volume Control Knob clockwise
until you hear a click. You see MOTOTRBO (TM) on the
display of the radio momentarily, followed by a
welcome message or welcome image.
The LED lights up solid green ( ) and the Home
screen lights up if the backlight setting is set to turn
on automatically.
A brief tone sounds, indicating that the power up test
is successful.
Note:
There is no power up tone if the radio tones/
alerts function is disabled (see Turning the
Radio Tones/Alerts On or Off on page 157).
Turn off the radio by rotating this knob
counterclockwise until you hear a click. You see a
brief Powering Down
on the display of the radio.
Adjusting the Volume
Increase the volume by turning the On/Off/Volume
Control Knob clockwise.
Decrease the volume by turning this knob
counterclockwise.
Preparing Your Radio for Use
27
English