User Manual

3
Press or to Networks and press to
select.
4
Press or to a network access point and
press to select.
5
Press or to View Details and press
to select.
For a connected network access point, the Service
Set Identifier (SSID), Security Mode, Media
Access Control (MAC) address, and Internet
Protocol (IP) address are displayed.
For a non-connected network access point, the
Service Set Identifier (SSID) and Security Mode
are displayed.
Removing Network Access Points
Note:
This feature is applicable to XPR 7550e/XPR
7580e only. Enterprise network access points
that are added via CPS can only be removed
via CPS.
Perform the following actions to remove network
access points from the profile list.
1
Press
to access the menu.
2
Press or to WiFi and press to select.
3
Press or to Networks and press to
select.
4
Press or to the selected network access
point and press
to select.
5
Press or to Remove and press to
select.
6
Press or to Yes and press to select.
The radio displays to indicate that the
selected network access point is successfully
removed.
Advanced Features in Connect Plus Mode
274
English