User Manual

Table Of Contents
7 Release the PTT button to listen.
When the target radio responds, the LED blinks
green and the display shows the transmitting
user's ID.
If there is no voice activity for a predetermined
period of time, the call ends.
You hear a short tone. The display shows Call
Ended.
Making a Call Alias Search
You can also use alias or alphanumeric search to
retrieve the required subscriber alias.
This feature is only applicable while in Contacts.
1
to access the menu.
2
or to Contacts and press to select.
The entries are alphabetically sorted.
3 Key in the first character of the required alias, and
then press
or to locate the required alias.
4 Hold the radio vertically 1 to 2 inches (2.5 to 5.0
cm) from your mouth.
5 Press the PTT button to make the call.
The LED lights up solid green. The display shows
the destination alias.
6 Wait for the Talk Permit Tone to finish (if enabled),
and speak clearly into the microphone.
7 Release the PTT button to listen.
When the target radio responds, the LED blinks
green.
If there is no voice activity for a predetermined
period of time, the call ends.
The display shows Call Ended.
Adding a New Contact
1
to access the menu.
2
or to Contacts and press to select.
Advanced Features in Connect Plus Mode
224
English