User Manual

Table Of Contents
Making an Outbound Private Phone Call via the Phone
Menu
1
to access the menu.
2
or to Phone and press to select.
3
Press to select Manual Dial.
The first line of the display shows Number, the
second line of the display shows a blinking cursor.
4 Use the keypad to enter a telephone number, and
press
to place a call to the entered number.
Press to delete any unwanted characters. Press
followed by within 2 seconds to insert
a pause. The P replaces * and
# on the display.
If successful, the first line of the display shows
Phone Call. The second line of the display shows
the dialed telephone number.
If an invalid telephone number is selected, the
display shows a negative mini notice, Phone Call
Failed, Resource Not Available, or Invalid
Permissions.
If
is pressed with no telephone number
entered, the radio sounds a positive indicator tone
then a negative indicator tone. The display
remains the same.
5
Long press
to end the call.
The first line of the display shows Ending. The
second line of the display shows Phone Call....
The display shows Phone Call Ended.
Making an Outbound Private Phone Call from Contacts
Note:
If the Phone Manual Dial is disabled in
MOTOTRBO Connect Plus Option Board
CPS, the Phone Number item will not be
displayed in the Menu.
1
to access the menu.
Making and Receiving Calls in Connect Plus Mode
208
English