User Manual

a blinking cursor. Key in the subscriber alias or
ID and press .
The display shows transitional mini notice,
confirming your message is being sent.
If the message is sent successfully, a tone sounds
and the display shows positive mini notice.
If the message cannot be sent, a low tone sounds
and the display shows negative mini notice.
Editing a Text Message
Select Edit to edit the message before sending it.
Note:
If a subject line is present (for messages
received from an e-mail application), you
cannot edit it.
1
or to Edit and press to select.
A blinking cursor appears.
2 Use the keypad to edit your message.
Press to move one space to the left. Press or
the key to move one space to the right.
Press the key to delete any unwanted
characters. Long press to change text entry
method.
3
Press
once message is composed.
4 Depending on whether you want to send, save, re-
edit, or delete the newly composed message, do
one of the following.
•
or to Send, and press to send the
message.
•
or to Save, and press to save the
message to the Drafts folder.
•
to edit the message.
•
to choose between deleting the message
or saving it to the Drafts folder.
Advanced Features in Non-Connect Plus Mode
116
English