User Manual

• All retries to send the alarm have been exhausted.
• The Emergency Off
button is pressed.
Note:
If your radio is powered off, it exits the
Emergency mode. The radio will not reinitiate
the Emergency mode automatically when it is
turned on again.
If you change channels when your radio is in
Emergency mode to a channel that has no
emergency system configured, No Emergency
is shown on your display.
Man Down
Note:
This feature is applicable to XPR 7550e/XPR
7580e only.
This feature prompts an emergency to be raised if
there is a change in the motion of the radio, such as
the tilt of the radio, motion and/or the lack of motion
for a predefined time.
Following a change in the motion of the radio for a
programmed duration, the radio pre-warns the user
via an audio indicator indicating that a change in
motion is detected.
If there is still no acknowledgment by the user before
the predefined reminder timer expires, the radio
initiates an Emergency Alarm or an Emergency Call.
You can program the reminder timer via CPS.
Turning the Man Down Feature On or Off
Note:
This feature is applicable to XPR 7550e/XPR
7580e only. The programmed
Man Down
button and Man Down settings are assigned
via CPS. Check with your dealer or system
administrator to determine how your radio has
been programmed.
If you disable the Man Down feature, the
programmed alert tone sounds repeatedly until
the Man Down feature is enabled. A device
failure tone sounds when the Man Down
feature fails while powering up. The device
failure tone continues until the radio resumes
normal operation.
If you enable Man Down to maximum
sensitivity and set Vibrate Style to high, the
radio automatically restricts Vibrate Style to
medium. This function prevents high Vibrate
Advanced Features in Non-Connect Plus Mode
109
English