User Manual

Table Of Contents

Scan

When you start a scan, your radio cycles through the

programmed scan list for the current channel looking

for voice activity.

The LED blinks yellow and the scan icon appears on

the status bar.

During a dual mode scan, if you are on a digital

channel, and your radio locks onto an analog

channel, it automatically switches from digital mode to

analog mode for the duration of the call. This is also

true for the reverse.

There are two ways of initiating scan:

• Main Channel Scan (Manual): Your radio scans

all the channels/groups in your scan list. On

entering scan, your radio may (depending on the

settings) automatically start on the last scanned

“active” channel/group or on the channel where

scan was initiated.

• Auto Scan (Automatic): Your radio automatically

starts scanning when you select a channel/group

that has Auto Scan enabled.

Note:

This feature is not applicable in Capacity Plus

and Linked Capacity Plus.

Starting and Stopping Scan

While scanning, the radio will only accept data (e.g.

text message, location, or PC data) if received on its

Selected Channel.

1 Use the Channel Selector Knob to select a

channel programmed with a scan list.

to access the menu.

or to Scan and press to select.

or to Scan State and press to

select.

or to required scan state and press

to select.

Advanced Features in Non-Connect Plus Mode

English