User Manual

Note:
This feature is limited to radios with this
function enabled. Check with your dealer or
system administrator for more information.
Password Lock Features
If enabled, this feature only allows you access your
radio if the correct password is entered upon
powering up.
Accessing the Radio from Password
1 Power up your radio.
You hear a continuous tone.
2 Do one of the following: Enter your current four-
digit password. Press or to edit each digit’s
numeric value. Each digit changes to . Press
to move to next digit. Press to confirm your
selection.
• Enter your current four-digit password with the
radio’s keypad. The second line of the display
shows . Press to proceed.
• Enter your current four-digit password. Press
or to edit each digit’s numeric value.
Each digit changes to . Press to move to
next digit. Press to confirm your selection.
You hear a positive indicator tone for every digit
entered. Press to remove the last on the
display. You hear a negative indicator tone, if you
press
when the second line of the display is
empty, or if you press more than four digits.
If the password is correct, your radio proceeds to
power up. See Powering Up the Radio on page
27.
If the password is incorrect,
the display shows
Wrong Password. Repeat Steps 1 and 2.
After the third incorrect password, the display
shows Wrong Password and then, shows Radio
Locked. A tone sounds and the LED double blinks
yellow.
Your radio enters into locked state for 15 minutes,
and responds to inputs from On/Off/Volume
Advanced Features in Non-Connect Plus Mode
138
English