User Manual

• Multigroup Call
• Site All Call
•
Private Call
Access the Zone feature by performing one of the
following actions:Press the programmed Zone
button.
Using Multiple Networks
If your radio has been programmed to use multiple
Connect Plus networks, you can select a different
network by switching to the Connect Plus zone that is
assigned to the desired network. These network-to-
zone assignments are configured by your dealer
through radio programming.
Selecting a Call Type
Use the Channel Selector Knob to select a call type.
This can be a Group Call, Multi-group Call, Site All
Call or Private Call, depending on how your radio is
programmed. If you change the Channel Selector
Knob to a different position (that has a call type
assigned to it), this causes the radio to re-register
with the Connect Plus site. The radio registers with
the Registration Group ID that has been programmed
for the new Channel Selector Knob position call type
.
If you select a position that has no call type assigned
to it, your radio sounds a continuous tone. Your radio
does not operate when selected to an unprogrammed
channel, use the Channel Selector Knob to select a
programmed channel instead.
Once the required zone is set (if you have multiple
zones in your radio), turn the programmed
Channel Selector Knob to select the call type.
Receiving and Responding to a Radio Call
Once the channel, subscriber ID or call type is set,
you can proceed to receive and respond to calls.
Making and Receiving Calls in Connect Plus Mode
72
English