User Manual
Table Of Contents
- Contents
- Declaration of Conformity
- Important Safety Information
- Software Version
- Computer Software Copyrights
- Handling Precautions
- Getting Started
- Preparing Your Radio for Use
- Identifying Radio Controls
- Non-Connect Plus Operations
- Additional Radio Controls in Non-Connect Plus Mode
- Making and Receiving Calls in Non-Connect Plus Mode
- Advanced Features in Non-Connect Plus Mode
- Scan Lists
- Scan
- Vote Scan
- Call Indicator Settings
- Call Alert Operation
- Emergency Operation
- Man Down
- Text Message Features
- Privacy
- Multi-Site Controls
- Lone Worker
- Password Lock Features
- Bluetooth Operation
- Auto-Range Transponder System (ARTS)
- Over-the-Air-Programming (OTAP)
- Wi-Fi Operation
- Utilities
- Setting the Power Level
- Turning the Option Board Feature(s) On or Off
- Turning the Voice Operating Transmission (VOX) Feature On or Off
- Turning the Radio Tones/Alerts On or Off
- Checking the Battery Strength
- Turning the Voice Announcement On or Off
- Setting the Text-to-Speech Feature
- Switching Audio Route between Internal Radio Speaker and Wired Accessory
- Intelligent Audio
- Turning the Acoustic Feedback Suppressor Feature On or Off
- Turning GPS/GNSS On or Off
- Flexible Receive List
- Connect Plus Operations
- Additional Radio Controls in Connect Plus Mode
- Making and Receiving Calls in Connect Plus Mode
- Advanced Features in Connect Plus Mode
- Accessories
- Maritime Radio Use in the VHF Frequency Range
- Batteries and Chargers Warranty
- Limited Warranty
- Blank Page
Note:
This feature is applicable to XPR 7350e/XPR
7380e
only.
This feature allows you to setup and connect to a Wi-
Fi
®
network. Wi-Fi supports updates for radio
firmware, codeplug, and resources such as language
packs and voice announcement.
Turning Wi-Fi On or Off
Note:
This feature is applicable to XPR 7350e/XPR
7380e
only.
The programmed Wi-Fi On or Off button is
assigned via CPS. Check with your dealer or
system administrator to determine how your
radio has been programmed.
You can turn on or turn off Wi-Fi
®
by performing the
following action.
Press the programmed Wi-Fi On or Off button.
Voice Announcement sounds Turning On Wi-Fi or
Turning Off Wi-Fi.
Connecting to a Network Access Point
Note:
This feature is applicable to XPR 7350e/XPR
7380e
only. The programmed Wi-Fi Status
Query button is assigned via CPS. Check with
your dealer or system administrator to
determine how your radio has been
programmed.
When you turn on Wi-Fi
®
, the radio scans and
connects to a network access point.
Press the programmed Wi-Fi Status Query button for
the connection status via Voice Announcement. Voice
Announcement sounds Wi-Fi is Off, Wi-Fi is On but
No Connection, or Wi-Fi is On with Connection.
Utilities
Setting the Power Level
You can customize the power setting of the radio to
high or low for each channel.
High enables communication with radios located at a
considerable distance from you. Low enables
communication with radios in closer proximity.
Advanced Features in Non-Connect Plus Mode
60
English