User Manual

Stopping an Automatic Site Search
When your radio is actively searching for a new
site, press the programmed Site Lock On/Off
button to stop automatic site search.
A tone sounds and the LED turns off.
Starting a Manual Site Search
Press the programmed Manual Site Roam button.
A tone sounds and the LED blinks green.
If a new site is found, a positive indicator tone
sounds and the LED turns off.
If there is no available site within range, a
negative
indicator tone sounds and the LED turns off.
Lone Worker
This feature raises an emergency if there is no user
activity, such as any radio button press or activation
of the channel selector, for a predefined time.
Before raising the emergency, when the inactivity
timer expires, the radio warns the user via an audio
indicator.
If there is still no acknowledgement by the user
before the predefined reminder timer expires, the
radio initiates an Emergency Alarm.
Only one of the following Emergency Alarms can be
assigned to this feature:
• Emergency Alarm
•
Emergency Alarm with Call
•
Emergency Alarm with Voice to Follow
The radio remains in the emergency state allowing
voice messages to proceed until action is taken. See
Emergency Operation on page 48 on ways to exit
Emergency.
Note:
This feature is limited to radios with this
function enabled. Check with your dealer or
system administrator for more information.
Password Lock Features
If enabled, this feature only allows you access your
radio if the correct password is entered upon
powering up. Use the Channel Selector Knob and the
three Side Buttons to enter password (see Radio
Controls on page 22).
Advanced Features in Non-Connect Plus Mode
56
English