User Manual

If the long press for the Emergency button is
assigned to turn on the Emergency mode,
then the short press for the Emergency button
is assigned to exit the Emergency mode.
Your radio supports three
Emergency Alarms:
• Emergency Alarm
• Emergency Alarm with Call
•
Emergency Alarm with Voice to Follow
Note:
Only one of the Emergency Alarms above can
be assigned to the programmed Emergency
button.
In addition, each alarm has the following types:
• Regular – Radio transmits an alarm signal and
shows audio and/or visual indicators.
• Silent – Radio transmits an alarm signal without
any audio or visual indicators. Radio receives calls
without any sound through the radio’s speaker,
until you press the PTT button to initiate the call.
• Silent with Voice – Radio transmits an alarm
signal without any audio or visual indicators, but
allow incoming calls to sound through the radio’s
speaker.
Receiving an Emergency Alarm
When your radio receives an Emergency Alarm, a
tone sounds and the LED blinks red until you exit
the Emergency mode. Perform one of the
following actions to silence the tone:
• Press the
PTT button to call the group of radios
which received the Emergency Alarm.
• Press any programmable button.
Note:
Your radio automatically acknowledges the
Emergency Alarm (if enabled).
Exiting Emergency Mode After Receiving the
Emergency Alarm
Exit the Emergency mode by performing one of
the following actions:
• Change the channel.
•
Press the Emergency Off button.
• Power down the radio.
Advanced Features in Non-Connect Plus Mode
49
English