User Manual

Table Of Contents

For radios with batteries that do not support the

vibrate feature and are not attached to a vibrating belt

clip, Ring Alert Type is automatically set to Ring. If

you press the programmed Ring Alert Type

button, a

bad key tone sounds, indicating the multiple Ring

Alert Type options are disabled.

You can select a Ring Alert Type by performing the

following action.

Press the programmed Ring Alert Type button to

toggle Voice Announcement or Text-to-Speech,

and the radio behavior to the following options.

• For Silent, Voice Announcement or Text-to-

Speech sounds Ring Alert Type Silent only.

• For Ring Only, Voice Announcement or Text-

to-Speech sounds Ring Alert Type and the

radio sounds a ring tone.

• For Vibrate Only, Voice Announcement or Text-

to-Speech sounds Ring Alert Type and the

radio vibrates.

• For Ring and Vibrate, Voice Announcement or

Text-to-Speech sounds Ring Alert Type and

the radio sounds a ring tone and vibrates.

Configuring Vibrate Style

Note:

The programmed Vibrate Style button is

assigned via CPS. Check with your dealer or

system administrator to determine how your

radio has been programmed.

Vibrate Style is enabled when the Vibrating Belt Clip

is attached to the radio with a battery that supports

the vibrate feature.

You can configure the vibrate style by performing the

following action.

Press the programmed Vibrate Style button to

toggle to short, medium, or long option and the

radio vibrates accordingly. Voice Announcement

or Text-to-Speech sounds Vibrate Style.

Escalating Alarm Tone Volume

You can program your radio

to continually alert you

when a radio call remains unanswered. This is done

by automatically increasing the alarm tone volume

over time. This feature is known as Escalert.

Advanced Features in Non-Connect Plus Mode

English