User Manual

4 Release the PTT button to listen.
When the target radio responds, the LED blinks
green
.
5
If the Channel Free Indication feature is
enabled, you hear a short alert tone the moment
the transmitting radio releases the PTT button,
indicating the channel is free for you to respond.
Press the PTT button to respond.
If there is no voice activity for a predetermined
period of time, the call ends.
Making a Private Call
While you can receive and/or respond to a Private
Call initiated by an authorized individual radio, your
radio must be programmed for you to initiate a Private
Call.
There are two types of Private Calls. The first type,
where a radio presence check is performed prior to
setting up the call, while the other sets up the call
immediately.
Only one of these call types can be programmed to
your radio by your dealer.
You will hear a negative indicator tone, when you
make a Private Call via the One Touch Access
button, or the , if this feature is not enabled.
Use the Quick Text Message or Call Alert features to
contact an individual radio. See Text Message
Features on page 54 or
Call Alert Operation on
page 48 for more information.
1 Do one of the following.
• Select the channel with the active subscriber
alias or ID. See Selecting a Channel on page
33.
• Press the programmed One Touch Access
button.
2 Hold the radio vertically 1 to 2 inches (2.5 to 5.0
cm) from your mouth.
3 Press the PTT button to make the call.
The LED lights up solid green.
4 Wait for the Talk Permit Tone to finish (if enabled),
and speak clearly into the microphone.
5 Release the PTT button to listen.
Making and Receiving Calls in Non-Connect Plus Mode
38
English