User Manual

Note:
The radio stops receiving the All Call if you
switch to a different channel while receiving
the call. During an All Call, you will not be able
to use any programmed button functions until
the call ends.
Receiving and Responding to a Selective Call
A Selective Call is a call from an individual radio to
another individual radio. It is a Private Call on an
analog system.
When you receive a Selective Call, the LED blinks
green. Your radio unmutes and the incoming call
sounds through the radio's speaker.
1 Hold the radio vertically 1 to 2 inches (2.5 to 5.0
cm) from your mouth.
2 Press the PTT button to respond to the call.
The LED lights up solid green.
3 Wait for the Talk Permit Tone to finish (if enabled),
and speak clearly into the microphone.
4 Release the PTT button to listen.
If there is no voice activity for a predetermined period
of time, the call ends.
You hear a short tone.
See Making a Private Call on page 38 for details on
making a Private Call.
Receiving and Responding to a Phone Call
Phone Call as a Private Call/Group Call
When you receive a Phone Call as a Private Call or
Group Call, the LED blinks green. Your radio
unmutes and the incoming call sounds through the
radio's speaker.
If Phone Call capability is not enabled on your radio,
your radio mutes the call.
1 Press the PTT button to talk and release it to
listen.
2 If there is no voice activity for a predetermined
period of time, the call ends.
You hear a short tone.
Phone Call as All Call
When you receive a Phone Call as an All Call,
Making and Receiving Calls in Non-Connect Plus Mode
36
English