User Manual

Table Of Contents
Powering Up the Radio
A
Rotate the On/Off/Volume Control Knob clockwise
until you hear a click.
The LED lights up solid green ( ).
A brief tone sounds, indicating that the power up test
is successful.
Note:
There is no power up tone if the radio tones/
alerts function is disabled (see Turning the
Radio Tones/Alerts On or Off on page 62).
Turn off the radio by rotating this knob
counterclockwise until you hear a click.
Adjusting the Volume
Increase the volume by turning the On/Off/Volume
Control Knob clockwise.
Decrease the volume by turning this knob
counterclockwise.
Note:
Your radio can be programmed to have a
minimum volume offset where the volume
level cannot be lowered past the programmed
minimum volume. Check with your dealer or
system administrator for more information.
Preparing Your Radio for Use
21
English