User's Manual

General Radio Operation

English

Using Mode Select Feature

Mode Select allows a long press to save your radio’s current

zone and channel to a programmable button, keypad button or

a softkey; then once programmed, the short-press of that button

or softkey jumps the transmission to the saved zone and

channel.

There are two methods to save the selected zone and channel:

• Softkeys

• Programmable buttons and keypad buttons (digit 0 to 9)

Note: Your radio must be preprogrammed to allow you to use

this feature.

Saving a Zone and Channel to a Softkey

Five softkeys are available for you to save the frequent used

zone and channel.

Procedure:

1 Toggle your zone and channel to the required zone and

channel.

2 < or > to MS1, MS2 ... or MS5.

3 Press and hold the Menu Select button directly below the

softkey.

4 You hear a short, medium-pitched tone when the zone and

channel is saved.

Note: To change the programmed zone and channel, repeat

this procedure.

Short press of the programmed softkey changes your current

transmission to the zone and channel programmed in this

softkey.

