User's Guide

When the radio is locked onto the channel to be
deleted,
Perform one of the following actions:
• Press the preprogrammed Nuisance Delete
button.
•
or to Nuis and press the Menu Select
button directly below Nuis.
The radio continues scanning the remaining channels
in the list.
Restoring a Nuisance Channel
To restore the deleted nuisance channel, perform
one of the following actions:
•
Turn the radio off and then turning it on again.
• Stop and restart a scan via the preprogrammed
Scan button or menu.
• Change the channel via the 16-Position
Select knob.
Call Alert Paging
This feature allows your radio to work like a pager.
Even if other users are away from their radios, or if
they are unable to hear their radios, you can send
them an individual Call Alert page. You can also
verify if a radio is active on the system.
Depending on how your radio is programmed, when
you make an Enhanced Private Call, the radio either
automatically sends a call alert page if there is no
answer after the maximum ring time, or when you
press the PTT
button.
Note: This feature must be preprogrammed by a
qualified radio technician.
Receiving a Call Alert Page
When you receive a Call Alert page, you hear four
repeating alert tones and the LED blinks green.
The
call received icons blinks and the display shows Page
received.
Press any button to clear the Call Alert page.
See Making a Talkgroup Call on page 54
or Making a
Private Call (Trunking Only) on page 54 for more
information on returning the call.
Sending a Call Alert Page
The following methods are options on how to send a
call alert page. The result of all the methods is the
same. You can use the options interchangeably
Advanced Features
70
English