User's Guide

Setting up the radio display and visual indicators
via the preprogrammed Profile button:
a)
Press the preprogrammed Profile button.
b)
or to the designated NVG profile.
c)
To select the required radio profile, press the
Menu Select button directly below Sel or to
exit the screen without making any changes,
press the Menu Select button directly below
Sel or to exit the screen without making any
changes, press the Menu Select button
directly below Exit.
The radio returns to the Home screen with
NVG display mode. The profile name on the
Home screen indicates the current selected
radio profile.
Locking and Unlocking the Controls
Check with your dealer or qualified technician for best
selection to suit your usage.
1 Toggle the preprogrammed Keypad/Control Lock
button or switch to on.
2
The display shows Kypd/Ctrl Lock.
3 To unlock the knobs and buttons, toggle again.
Turning the Controls and Buttons Tones On or Off
You can enable and disable the tones of Navigation
buttons and controls if needed.
• Turning the tones on or off via the preprogrammed
Mute button:
a)
To turn the tones off or on, press the
preprogrammed Mute button.
• Turning the tones on or off via the radio menu:
a)
or to Mute.
b) Press the Menu Select button directly below
Mute.
The display shows momentary Tones off,
indicating that the tones are disabled or the
display shows momentary Tones on, and you
hear a short tone indicating that the tones are
enabled.
Turning Voice Mute On or Off
You can enable and disable voice transmission, if
needed.
The following methods are options on how to turn
Voice Mute on or off. The result of all the methods is
the same. You can use the options interchangeably
Advanced Features
137
English