User's Guide

Note: A predefined username that is set more than
the maximum allowed characters is an invalid name.
Logging In as a User
1 Perform one of the following actions:
• Press the preprogrammed User Login button.
•
or to Sel to select the predefined user
name.
• Press and hold or to scroll through the
list of predefined user names at a fast scroll
rate. Press the Menu Select button directly
below Sel to select the predefined user name.
If the ID is invalid, the display shows momentary
Invalid ID.
2 Enter your Personal Identification Number (PIN)
number.
3 Press the Menu Select button directly below
Logn.
One of the following scenarios occurs:
• In ARS Server Mode, the display shows the
User Login Indicator icon, the ID, and In
progress
, with Cncl.
• In ARS Non-Server Mode, the display shows
the User Login Indicator icon, the ID, and
Logged in, with Logt and Exit.
•
In non-ARS enabled mode, the display shows
Offline
, with Logt and Exit.
One of the following scenarios occurs:
• If the user name is invalid, login fails and the user
login failure indicator (IP indicator) icon blinks. The
display also shows momentary Login failed
.
• If the PIN is invalid, login fails and the user login
failure indicator (IP indicator) icon blinks. The
display also shows momentary Login failed.
• Wait for the logged in confirmation screen. If the
login process is successful, the display shows the
successful user login indicator (IP indicator) icon
and Logged in, with Logt and Exit.
Note: To cancel the login process and return to the
initial user login screen, press the Menu Select
button directly below Cncl.
Logging Out
When you have logged in or you are using Offline
mode, you can log out.
Advanced Features
93
English