User's Guide

Press any button to clear the Call Alert page.
See Making a Talkgroup Call on page 60
or Making a
Private Call (Trunking Only) on page 60 for more
information on returning the call.
Sending a Call Alert Page
The following methods are options on how to send a
call alert page. The result of all the methods is the
same. You can use the options interchangeably
depending on your preference and the programmed
functions.
Note: The radio automatically exits the feature, if the
feature inactivity timer is enabled, when the radio is
left idle and the timer expires. You will hear the Menu
Inactive Exit Tone upon feature exit.
• Sending a call alert page via the preprogrammed
Quick Access (One-Touch) Call Alert Paging
button:
a) Press the preprogrammed Quick Access
(One-Touch) Call Alert Paging button to send
a page to the preprogrammed ID.
The display shows Paging...<Number>
.
If the call alert page is sent successfully, you
hear a tone and the display shows Ack
received. The radio returns to the Home
screen.
If the call alert page is not acknowledged, you
hear a low tone and the display shows No
acknowledge. Press the Menu Select button
directly below Ok
to return to the main screen
for Contacts.
•
Sending a call alert page via the radio menu Page:
a)
or to Page.
b) Press the
Menu Select button directly below
Page.
c) Press the Menu Select button directly below
Cnts to view the required ID,
or to the
required ID, or use the keypad to enter the
required ID.
d) Press the
PTT button to send the page.
The display shows Paging...<Number>.
If the call alert page is sent successfully, you
hear a tone and the display shows Ack
received. The radio returns to the Home
screen.
Advanced Features
80
English