User's Guide
Table Of Contents
- Contents
- Declaration of Conformity
- Important Safety Information
- Software Version
- Consignes de sécurité importantes
- Version logicielle
- Computer Software Copyrights
- Documentation Copyrights
- Disclaimer
- Getting Started
- Preparing Your Radio for Use
- Identifying Radio Controls
- Identifying Status Indicators
- Limited Warranty
IMPRES Battery Annunciator
This feature displays the current capacity and
charges cycles of your battery when an IMPRES
™
Battery is powering your radio. This feature must be
enabled in your radio to see the information.
The information shown are:
Rated Capacity Percentage of current battery
capacity.
Remaining
Capacity
Remaining power of the battery
in mAh.
Estimated
Charges
Number of charges cycles the
battery has gone through.
Accessing the Battery Info screen
1
or to Batt.
2 Press the Menu Select button directly below
Batt.
The display shows the details of the battery.
3 To return to the Home screen, press the Menu
Select button directly below Exit
.
General Radio Information
Your radio contains information on the following:
• Radio Information
•
IP Display
• Control Assignments
• Soft ID (If enabled)
Note: The radio automatically exits the feature, if the
feature inactivity timer is enabled, when the radio is
left idle and the timer expires. You hear the Menu
Inactive Exit Tone upon feature exit.
Accessing the Radio Information
This feature displays the following radio information:
• Host Version
•
Secure Version
• Model Number
• ESN
• Flash Code
• Tuning Version
• Option Board Type (optional)
• Option Board Bluetooth Address (optional)
• Expansion Board Type (optional)
• DSP Version
Advanced Features
164
English