User's Guide

Note: The Zone Select feature must to be
preprogrammed to the 3-position A-B-C switch,
while the Enhanced Zone Bank feature must be
preprogrammed to any side
button or Top (Orange)
button before you can use this feature.
1 Press the preprogrammed EZB Up or EZB Down
button to scroll the EZB up or down or press and
hold the preprogrammed EZB Up or EZB Down
button to fast scroll the EZB up or down.
2 Turn the 3-Position A/B/C Switch to select the
first, second or third zone in the selected EZB.
Selecting the Power Level
Note: This feature must be preprogrammed by a
qualified radio technician.
This feature enables you to reduce the transmit
power level for specific case that requires a lower
power level. You can select the power level at which
your radio transmits. The radio always turns on to the
default setting. These reduced transmit power level
settings do not affect the receiving performance of
your radio, nor diminish the overall quality of the
audio and data functionality of the radio given the
following conditions.
Power levelLow enables a shorter transmitting
distance and to conserve power. Power levelHigh
enables a longer transmitting distance.
The following methods are options on how to select
the power level. The result of all the methods is the
same. You can use the options interchangeably
depending on your preference and the programmed
functions.
• Selecting the Power Level via the Transmit
Power Level switch:
a) Use the preprogrammed Transmit Power
Level switch to toggle the power level between
low and high power.
• Selecting the Power Level via the radio menu:
a)
or to Pwr.
b) Press the
Menu Select button directly below
Pwr.
The display shows Low power and the low power
icon or the display shows High power and the high
power icon.
Advanced Features
155
English