User's Guide
Table Of Contents
- Contents
- Declaration of Conformity
- Important Safety Information
- Software Version
- Consignes de sécurité importantes
- Version logicielle
- Computer Software Copyrights
- Documentation Copyrights
- Disclaimer
- Getting Started
- Preparing Your Radio for Use
- Identifying Radio Controls
- Identifying Status Indicators
- Limited Warranty
3
or to Start Alert and press the Menu
Select button directly below Sel.
The display shows the Select Site screen.
4
or to [SiteID Entry] to send alert via
manual entry. Press the Menu Select button
directly below Edit
.
The display shows the Enter SiteID screen.
5 Key in the desired Site ID and press the Menu
Select button directly below Ok
.
If a correct Site ID is entered, the display shows
the Select Alert screen.
If a wrong Site ID is entered, the display shows
Invalid ID and prompts to enter the Site ID
again.
6 or to select the desired Alert Alias and press
the Menu Select button directly below Send.
The display shows Sending req.
If radio is out of range, roaming to a foreign
system or in a failsoft situation, the display shows
Req failed.
If the request is successful, the display shows Req
successful.
If the site is not available, the display shows <Site
ID> not available.
If the site does not exist, the display shows <Site
ID>does not exist.
7 To return to the Home screen, press the Menu
Select button directly below Exit
.
If you are at the site designated to receive this alert,
you can hear an alert tone repeated periodically. The
display shows the <Alert Alias> with the intelligent
lighting at Home screen.
Sending SSA Notification to All Sites
1
or to SSA.
2
Press the Menu Select button directly below SSA.
The display shows the Site Alert screen.
3
or to Start Alert and press the Menu
Select button directly below Sel
.
The display shows the Select Site screen.
4
or to [All Sites] and press the Menu
Select button directly below Sel
.
The display shows the Select Alert screen.
Advanced Features
149
English