User's Manual
Table Of Contents
- Disclaimer
- Declaration of Conformity
- Regulatory Requirements
- Safety and General Information
- Warranty Information
- Preface
- Chapter 1 - Introduction
- Chapter 2 - Installation
- Your Package Content
- Getting to Know Your WDE1000
- Inserting WDE1000 Into Your Laptop Computer
- Removing WDE1000 from Your Laptop Computer
- System Requirements
- Installing the MCU (Motorola Client Utility) Application
- Uninstalling the MCU (Motorola Client Utility) Application
- Upgrading the MCU (Motorola Client Utility) Application
- Chapter 3 - Operation
- Chapter 4 - Troubleshooting
- Chapter 5 - Glossary
- Appendix A - Disabling/Removing Wifi Drivers
41
WDE1000/1100 User’s Guide - Chapter 3 - Operation
4. You are now ready for data transfer operation.
LED Indicators Operation
Your WDE1000 is equipped with two LED indicators. LEDs indications are described in Table 4.
TABLE 4. Indication LEDs
Power LED
(Green)
Network
LED (Green) Indication
Off Off WDE1000 is not receiving power.
Blinking
slowly
Off WDE1000 is in power save mode.
On Off WDE1000 has awakened from power save mode.
Alternating blink: WDE1000 is scanning for the wireless network for
which it is configured.
On Off
Off On
Blinking
slowly
Blinking
slowly
WDE1000 is associated to an access point (in
infrastructure mode) or another WDE card (in ad hoc
mode).
Blinking
Rapidly
Blinking
Rapidly
WDE1000 is transmitting or receiving data while
associated to an access point (in infrastructure mode) or
another WDE card (in ad hoc mode).