User's Manual

D
R
A
F
T
Using Your Car Kit
20
Using the MUTE and UNMUTE Commands
Call Waiting
When you are on a call, an audible beep signals a 2nd call.
Note: If the ANSWER button is not pressed, the incoming call is automatically
rejected and sent to voicemail (if set up on the phone).
Sending DTMF Tones
You can send DTMF tones from the phone keypad, or by using the Enter command:
Managing the Contact List
You can store a list of names and phone numbers in your car kit’s contact list. The
list can include up to 20 entries.
Adding an Entry
Action
To mute the microphone during a call, press the TALK button. When
prompted, say “
Mute .”
To unmute the microphone, press the TALK button. When prompted, say
“
Unmute .”
Action
Press and release the ANSWER button to place the 1st call on hold and
answer the incoming call.
Each time you press and release the ANSWER button, you toggle between
active calls.
Action
1 Press the TALK button.
2 When prompted, say “ Enter <digits> ” to send numbers as DTMF tones.
Action
1 Press the TALK button.
2 When prompted, say “ Contact List .”
3 If the system responds: Contact list is empty. Do you wish to add a contact? , say
“
Yes .”
or
If the system responds: Contact list. Please say a command , say “ Add entry. ”