User's Manual

D
R
A
F
T
Using Your Car Kit
16
Calling with Digit Segments
To delete a phone number segment, say “ Clear ” when prompted for the next
segment. The system responds
Last String Cleared , echoes any remaining segments,
and waits for you to dictate a new segment.
To clear all phone number segments dictated so far, say “ Clear All ” when prompted
for the next segment. The system clears all segments and returns to the
Number
please?
prompt (see step 2 above).
Dialing a Number from the Contact List
3 Dictate the phone number as a single set of digits (without pauses
between digits).
The system recites the digits heard.
4 If the number recited by the system is correct, say “ Dial. ” The system
responds:
Dialing .
Action
1 Press the TALK button.
2 When prompted, say “ Dial Number. ”
The system responds: Number please? .
3 Dictate the first segment of digits. (For example, say the 1st 3 numbers.)
The system recites the digits heard.
4 Dictate the next segment of digits. The system recites the digits heard.
Repeat this step until you enter the complete phone number.
5 When the complete number is recited by the system, say “ Dial. ” The
system responds:
Dialing .
Action
1 Press the TALK button.
2 When prompted, say “ Call <contact> .”
Note: The contact must be a valid contact stored in the Contact List.
The system responds: Do you want to call < contact >? .
3 If the number recited by the system is correct, say “ Yes. ” The system
responds:
Calling .
Action