User's Manual
Table Of Contents
- COMPUTER SOFTWARE COPYRIGHTS
- Notational Conventions
- Welcome
- What is the HC700-G Handheld Computer?
- Unpacking
- HC700-G Features
- Charging the Battery
- Figure 3. HC700-G Personal Desktop Cradle
- Battery Replacement
- Figure 4. Battery Installation and Removal
- 1. Hold down the Power Button for at least four seconds until the HC700-G screen turns off.
- 2. Remove the HC700-G hand-strap (see Figure 4).
- 3. Press the battery snap on the battery (see Figure 4) and pull away the battery from the HC700-G.
- 4. Insert a fresh battery, bottom end first, into the battery compartment.
- 5. Carefully, press the battery top downward until it clicks and locks in place.
- 6. Press the Power Button - the HC700-G is now ready for use.
- First Time Battery Charge
- Routine Battery Charge
- Battery Maintenance
- Battery Disposal
- To Prevent Injury or Burns
- Using the HC700-G
- Starting to Work
- Turning On
- Turning Off
- Suspend Mode
- The Status LED
- The Application LED
- Making a Call
- Voice Recording
- Using the Keypad
- Direct Action Keys
- Scanning Barcodes and Capturing Images
- Figure 7. Capturing Images with the HC700-G Imager
- 1. Run the Bcr barcode reader application: Start Menu- >Programs->Sample Applications->Bcr.
- 2. Aim and hold the HC700-G at 2 to 12 inches (5 to 30 cm) distance from the target.
- 3. Press one of the Scan keys and aim the green aiming bar towards the target to adjust your posi...
- Resetting the HC700-G
- Mini SD Memory Card
- Installing a Mini SD Card
- Mini SD Card Handling Precautions
- SIM Card Installation
- Figure 12. SIM Card Installation
- 1. Remove the battery.
- 2. Open the SIM card door
- 3. Slide the SIM card holder forward to unlock the SIM card
- 4. Slide the new SIM card in the holder with the cut corner on the upper right and the gold plate...
- 5. Lower the SIM card holder and press downward to lock the SIM card holder
- 6. Close the SIM card door
- 7. Install the battery
- Service
- ActiveSync (USB) Connectivity
- Troubleshooting
23
5. Lower the SIM card holder and press downward to lock
the SIM card holder
6. Close the SIM card door
7. Install the battery
Service
The HC700-G does not contain user serviceable parts. How-
ever, the following sections provide maintenance guidelines.
Maintaining the HC700-G
In order to maintain the HC700-G in good working order:
• Do not scratch the screen. Use only Motorola supplied
stylus.
• Never use a pen or pencil or any sharp object on the
screen.
• Protect the HC700-G from temperature extremes. Do not
leave the HC700-G on the dashboard of a car on a hot
day, and keep the HC700-G away from hot places.
• Do not store or use the HC700-G in any location that is
extremely dusty, damp or wet.
Cleaning
This section details the cleaning instructions for the battery
contacts, screen and any other part of the HC700-G.
Cleaning Materials
To clean the HC700-G, use Chemical Pure grade (C.P) “Isopro-
pyl Alcohol (IPA)” also named “Iso Propanol”.
You may use Isopropyl Alcohol (IPA) manufactured by Merck,
Riedel-de Haen, or any other reputable chemical manufac-
turer.
It is recommended to use a soft lint free cloth such as Tex-
wipe TX512, BlueWipe cleaning rag/cloth. It is also possible
to use optic lens wiping paper such as "rice paper".
Before using any of the materials detailed
below, refer to the safety instructions shown
on the product’s label or package.
!
Caution
Enhanced IMD Users.book Page 23 Thursday, February 9, 2006 11:52 AM