User's Manual
Table Of Contents
- COMPUTER SOFTWARE COPYRIGHTS
- Notational Conventions
- Welcome
- What is the HC700-G Handheld Computer?
- Unpacking
- HC700-G Features
- Charging the Battery
- Figure 3. HC700-G Personal Desktop Cradle
- Battery Replacement
- Figure 4. Battery Installation and Removal
- 1. Hold down the Power Button for at least four seconds until the HC700-G screen turns off.
- 2. Remove the HC700-G hand-strap (see Figure 4).
- 3. Press the battery snap on the battery (see Figure 4) and pull away the battery from the HC700-G.
- 4. Insert a fresh battery, bottom end first, into the battery compartment.
- 5. Carefully, press the battery top downward until it clicks and locks in place.
- 6. Press the Power Button - the HC700-G is now ready for use.
- First Time Battery Charge
- Routine Battery Charge
- Battery Maintenance
- Battery Disposal
- To Prevent Injury or Burns
- Using the HC700-G
- Starting to Work
- Turning On
- Turning Off
- Suspend Mode
- The Status LED
- The Application LED
- Making a Call
- Voice Recording
- Using the Keypad
- Direct Action Keys
- Scanning Barcodes and Capturing Images
- Figure 7. Capturing Images with the HC700-G Imager
- 1. Run the Bcr barcode reader application: Start Menu- >Programs->Sample Applications->Bcr.
- 2. Aim and hold the HC700-G at 2 to 12 inches (5 to 30 cm) distance from the target.
- 3. Press one of the Scan keys and aim the green aiming bar towards the target to adjust your posi...
- Resetting the HC700-G
- Mini SD Memory Card
- Installing a Mini SD Card
- Mini SD Card Handling Precautions
- SIM Card Installation
- Figure 12. SIM Card Installation
- 1. Remove the battery.
- 2. Open the SIM card door
- 3. Slide the SIM card holder forward to unlock the SIM card
- 4. Slide the new SIM card in the holder with the cut corner on the upper right and the gold plate...
- 5. Lower the SIM card holder and press downward to lock the SIM card holder
- 6. Close the SIM card door
- 7. Install the battery
- Service
- ActiveSync (USB) Connectivity
- Troubleshooting
1
Welcome
Welcome to the world of Motorola digital wireless communi-
cations! We are pleased that you have chosen the Motorola
HC700-G GSM wireless Handheld Computer.
The HC700-G unique functionality and features make this
state-of-the-art device, superior for use in a wide range of
data collection and management applications.
This manual covers the basic operations and use of the
HC700-G. However, evaluation of the HC700-G performance
can be fully achieved by referring to Microsoft
®
Windows
®
Mobile 2003 SE for Pocket PC Phone Edition documentation
and using the demo software applications provided with the
HC700-G.
What is the HC700-G Handheld
Computer?
The HC700 is a rugged handheld computer. The HC700 is
designed for field applications where fast data acquisition
and exchange is required.
The HC700-G has two models: the HC700-G model is the USA
version and the HCe700-G model is the European/Asian ver-
sion. This manual refers to all models as HC700-G.
The HC700-G serves as a Personal Digital Assistant (PDA)
that enables portable access to Microsoft
®
Windows
®
Mobile 2003 SE for Pocket PC Phone Edition applications. It
contains a built-in imager (camera) capable of reading 1D and
2D barcode (optional) labels. The imager can also capture
handwritten images such as signatures and correlate the sig-
nature to an adjacent barcode.
Wireless communication enables access to the outside world
through Global System for Mobile communication (GSM),
General Packet Radio Service (GPRS) and 802.11b Wireless
Local Area Network (WLAN, WiFi).
Data exchange with peripheral wireless equipment can be
established through Wireless Personal Area Network
Enhanced IMD Users.book Page 1 Thursday, February 9, 2006 11:52 AM