User's Manual

5
Using Your Hands Free Imager Indicators
Hands Free Imager Indicator
Hands Free Imager LED Indicator Status
No light Idle or capturing and decoding
One green pulse Successful scan indication
Blinks Yellow B.T disconnected
One red pulse Unsuccessful scan host indication
One red pulse B.T disconnecting
Steady Yellow B.T is connecting
Three red pulses No host acknowledge
Audio Tones
Audio Tone Hands Free Imager Status
Hands Free Imager Tone Indication Status
1 beep B.T connect
2 beeps B.T disconnecting
3 beeps Successfully scan host indication
4 beeps Scan timeout
5 beeps Unsuccessful scan Host indication
6 beeps No host acknowledge
Resetting the Hands Free Imager
If the Hands-free Imager fails to communicate, you may need to reset the Hands-free Imager.
Step
1. Plug the Hands-free Imager into the charger.
2. Wait 5 seconds.
3. Detach the Hands-free Imager from the charger.
Note: Resetting the Hands-free Imager does not affect paired links or device data.