User's Manual

3
Hands Free Imager Charger LED Indicators
LED Color Indication
No Light Empty battery bay
Steady red Battery charging
Steady Green Battery charge complete
Flashing Red & Green Defective battery
Flashing yellow
Battery charging had stopped. Battery temperature is either too high or low.
Charging resumes once battery temperatures are within operating range.
Wearing the Hands Free Imager
Wearing the Hands Free Imager on Your
Hand
The Hands-free Imager is configured for wear on the right or left
hand.
Steps
1. Release the Finger-strap.
2. Insert your fingers into the Finger-strap.
3. Secure the straps, so the straps will not interfere with the Imager window
Connecting the Bluetooth Link
To start the Bluetooth connection between the Hands-free Imager and terminal (or computer), turn
the Hands-free Imager on by pressing the Multifunction button. Your terminal should detect the
Hands-free Imager automatically and establish communication.
Disconnecting the Bluetooth Link
To terminate the Bluetooth connection between the Hands-free Imager and terminal (or computer),
turn the Hands-free Imager off by holding the Multifunction button pressed for more than three
seconds.