Hands-Free Imager User Guide ab DRAFT November 30, 2004 6802976C40-O @6802976C40@
ii
Welcome The Hands-free Imager is a hand-warn device that enables image capturing and barcode decoding. The Imager transmits the captured 640 x 480 pixels gray scale VGA images to a portable terminal (or computer) with the convenience and freedom from cables and wires. Bluetooth wireless technology makes all connections to the terminal quickly and without any cables. All Motorola wireless products are designed and manufactured to meet Motorola’s rigorous specifications and world-class quality standards.
Contents Safety and General Information............................................................................................................... v Introduction............................................................................................................................................... 1 What Is Bluetooth Wireless Technology?........................................................................................... 1 What Is Included in This Kit?........................................
Safety and General Information IMPORTANT INFORMATION ON SAFE AND EFFICIENT OPERATION. READ THIS INFORMATION BEFORE USING YOUR HANDS FREE IMAGER. Users are not permitted to make changes or modify the device in any way. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules.
Hearing Aids Some digital wireless devices may interfere with some hearing aids. In the event of such interference, you may want to consult with your hearing aid manufacturer to discuss alternatives. Other Medical Devices If you use any other personal medical device, consult the manufacturer of your device to determine if it is adequately shielded from RF energy. Your physician may be able to assist you in obtaining this information.
Accessory Safety Information IMPORTANT: SAVE THESE ACCESSORY SAFETY INSTRUCTIONS • Before using any battery or battery charger, read all the instructions for and cautionary markings on (1) the battery, (2) the battery charger, which may include a separate power supply or transformer, and (3) the wireless device using the battery. • Do not expose any battery charger to water, rain, or snow. Do not replace or change accessories in a hazardous atmosphere.
viii • The cord size is 18AWG for lengths up to 100 feet and 16AWG for lengths up to 150 feet. • To reduce the risk of injury, charge only the rechargeable batteries listed in the Accessories section of this manual. Other types of batteries may burst, causing personal injury and damage.
Introduction What Is Bluetooth Wireless Technology? Bluetooth wireless technology drives you into a new dimension in connectivity. Bluetooth devices communicate without wires, using built-in radio transceivers that operate on a globally available radio frequency to ensure worldwide compatibility. Your Hands-free Imager can communicate with other Bluetooth devices within a range of approximately 10 meters (33 feet). What Is Included in This Kit? This package includes the following: • Hands-free Imager • 3.
Using Your Hands Free Imager Charging Your Hands Free Imager Installing the Battery 1. Insert the battery, bottom end first, into the battery compartment. 2. Carefully slide the battery into the Handsfree Imager until it clicks into place. Battery Note: The battery is charged within the Hands-free Imager. Once installed, the battery should not be removed from the Hands-free Imager, unless it is damaged.
Hands Free Imager Charger LED Indicators LED Color Indication No Light Empty battery bay Steady red Battery charging Steady Green Battery charge complete Flashing Red & Green Defective battery Flashing yellow Battery charging had stopped. Battery temperature is either too high or low. Charging resumes once battery temperatures are within operating range.
Capturing Images or Barcode Labels The Hands-free Imager houses a digital camera (Imager) that captures the most commonly used 1D and 2D barcodes. The Hands-free Imager supports omni-directional operation for easy use in daily work. The Imager captures digital images, such as signatures or pictures of any mail object or form. The images are stored in the Hands-free Imager memory. To capture an Image: 1.
Using Your Hands Free Imager Indicators Hands Free Imager Indicator Hands Free Imager LED Indicator Status No light Idle or capturing and decoding One green pulse Successful scan indication Blinks Yellow B.T disconnected One red pulse Unsuccessful scan host indication One red pulse B.T disconnecting Steady Yellow B.T is connecting Three red pulses No host acknowledge Audio Tones Audio Tone Hands Free Imager Status Hands Free Imager Tone Indication Status 1 beep B.T connect 2 beeps B.
Troubleshooting Whenever there is a problem, check the battery, power cable, and other physical items that might be loose, disconnected, or failing. It is also possible, though unlikely, that Hands-free Imager or charger, which once was operative, might become damaged. In the case of charger operation failure, power supply is properly connected, and no physical item is visible, it is recommended to reset charger by unplugging the power supply, waiting a few second, and re-plugging it.
MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. All other product or service names are the property of their respective owners. The Bluetooth trademarks are owned by their proprietor and used by Motorola, Inc. under license. (C) Motorola, Inc. 2002.
