User's Manual

provider is down. To guarantee that the modem is located in an area with good coverage, and that an end-to-end loopback message is

possible, your product needs a software application to perform the test.

The most effective approach to field-testing is to include an installation test procedure as part of your standard software load.

Motorola can recommend specific network information that you can obtain from the modem describing how to implement an end-

to-end loopback test. Refer to Chapter 7, “Testing”, page 83 ?, for further information.

3.13. RESOURCE ASSISTANCE

Developing and testing a wireless integrated product requires a well-equipped development lab and access to resources and

outside information. Table 1, “Parts and Tools Requirements”, below, identifies the required development and service tools.

Information is also provided regarding where to obtain the tools and how to obtain further assistance.

3.14. Integrating Engineering Support

Questions on this manual and the integration process are handled by Motorola’s integration engineering teams located in North

America. Send an email to TBD, with your name, phone number, company name, description of the project and your question.

An engineer will be assigned to your project and will contact you by phone or by email to assist you in resolving any issues.

Table 2 Parts and Tools Requirements