User's Manual
Table Of Contents
- COMPUTER SOFTWARE COPYRIGHTS
- Introduction
- What is the X-Pad Terminal
- Unpacking
- X-Pad Parts
- Charging the Battery
- Figure 3. Battery Installation and Removal
- Battery Installation and Removal
- 1. Insert the battery, bottom end first, into the battery compartment (see Figure 3).
- 2. Carefully press the battery top downward until it clicks into place. When X-Pad is powered by ...
- 1. Turn the X-Pad off by holding the Power button pressed (see Figure 1), for at least four seconds.
- 2. Press the Release Buttons on the battery sides (see Figure 3) and pull away the battery from t...
- The Universal Office Dock (UOD) Unit
- First Time Battery Charge
- Routine Battery Charge
- Battery Maintenance
- Battery Storage
- Extending Battery Life
- Using the X-Pad
- Maintaining the X-Pad
- Accessories
- Troubleshooting
- Safety Instructions
- SPECIFICATIONS
23
SPECIFICATIONS
PHYSICAL SPECIFICATIONS
Weight 23.7 ± 0.3oz (672 ±10g)
Dimensions Width x Length x Depth: 4.1 x 8 x 1.9“ (104
x 202 x 48 mm)
ENVIRONOMENTAL
Operating Temperature Ambient temperature range of shall be 0°C
to +60°C
Storage Temperature Terminal: -20°C to +70°C
Battery: -20°C to +60°C
Humidity 8 hours exposure to 90-95% non condens-
ing relative humidity at 50°C.
ELECTRICAL SPECIFICATIONS
Processor type INTEL PXA270 Xscale running at 416MHz
Memory Flash: 64 MB, 32-bit data bus, SDRAM: 64
MB, 32-bit data bus
Non-Volatile Memory Compact Flash 128 MB
Display 3.5” color, transflective, native portrait LCD
with illumination. Resolution: 240 x 320 pix-
els (1/4 VGA) Viewing angle ± 35
° in both X
and Y axis. Viewing area smaller by about
2 mm all around
Touch Screen 65,000 signatures (<1% linearity change)
65,000 to 85,000 signatures (<4% linearity
change)
Operating force < 100 grams with stylus