User's Manual
Table Of Contents
- COMPUTER SOFTWARE COPYRIGHTS
- Introduction
- What is the X-Pad Terminal
- Unpacking
- X-Pad Parts
- Charging the Battery
- Figure 3. Battery Installation and Removal
- Battery Installation and Removal
- 1. Insert the battery, bottom end first, into the battery compartment (see Figure 3).
- 2. Carefully press the battery top downward until it clicks into place. When X-Pad is powered by ...
- 1. Turn the X-Pad off by holding the Power button pressed (see Figure 1), for at least four seconds.
- 2. Press the Release Buttons on the battery sides (see Figure 3) and pull away the battery from t...
- The Universal Office Dock (UOD) Unit
- First Time Battery Charge
- Routine Battery Charge
- Battery Maintenance
- Battery Storage
- Extending Battery Life
- Using the X-Pad
- Maintaining the X-Pad
- Accessories
- Troubleshooting
- Safety Instructions
- SPECIFICATIONS
18
It is the responsibility of the user to use only the approved accessories
supplied for this product, as detailed in Table 3 . Motorola is not responsi-
ble for the use of accessories not approved for this product.
For more information on the availability of these accessories, please call
your company supplier.
Troubleshooting
Table 4: Troubleshooting the X-Pad
Problem Cause Solution
X-Pad does not
turn On
Battery is not
installed properly or
not charged
Ensure proper battery installa-
tion in X-Pad.
Charge or replace the battery
X-Pad in Suspend
mode
Press the Power Button
Battery does not
charge in UOD
X-Pad is not locked in
UOD
Reinstall X-Pad in UOD. Lock the
X-Pad properly in UOD. (See that
the UOD LED is On and charge
for three hours)
X-Pad or UOD Dock
contacts are not clean
Clean contacts and remove dust
and objects from within the UOD
Battery temperature
is out of range
Ensure that the battery tempera-
ture range is 32°F to 95°F (0°C
to 35°C)
Bad battery Replace battery