User's Manual
Table Of Contents
- COMPUTER SOFTWARE COPYRIGHTS
- Introduction
- What is the X-Pad Terminal
- Unpacking
- X-Pad Parts
- Charging the Battery
- Figure 3. Battery Installation and Removal
- Battery Installation and Removal
- 1. Insert the battery, bottom end first, into the battery compartment (see Figure 3).
- 2. Carefully press the battery top downward until it clicks into place. When X-Pad is powered by ...
- 1. Turn the X-Pad off by holding the Power button pressed (see Figure 1), for at least four seconds.
- 2. Press the Release Buttons on the battery sides (see Figure 3) and pull away the battery from t...
- The Universal Office Dock (UOD) Unit
- First Time Battery Charge
- Routine Battery Charge
- Battery Maintenance
- Battery Storage
- Extending Battery Life
- Using the X-Pad
- Maintaining the X-Pad
- Accessories
- Troubleshooting
- Safety Instructions
- SPECIFICATIONS
2
What is the X-Pad Terminal
The X-Pad handheld data terminal is a rugged device, designed for field
applications where fast data acquisition is required.
The X-Pad carries the functionality of a state-of-the-art Personal Digital
Assistant (PDA) that enables portable access to mobile applications, such
as mobile messaging, queries and Computer Aided Dispatch.
It contains a variety of options, including built-in CMOS imager for barcode
labels and image capture, Bluetooth
®
, Wi-Fi
®
LAN (Local Area Network)
and General Packet Radio Service (GPRS) wireless radios, all with internal
antennas for increased ruggedization.
The 3.5” color touch screen with illumination enables easy access to vari-
ous applications and signature capture in all light conditions. The IrDA port
serves for data exchange between the X-Pad and data network using the
Universal Office Dock (UOD) unit.
The PocketPC 2003
®
-based operating system supports multimedia and
audio applications, using a built-in microphone, speaker and buzzer. A
removable CompactFlash (accessed only by service) is used for memory
expansion and operating system updates.
The X-Pad is powered by a 7.2V 1800 mAh Lithium-Ion battery pack that
supports 12 hours of typical operation. The battery is fully recharged
within three hours, using the UOD unit.