User's Manual
Table Of Contents
- COMPUTER SOFTWARE COPYRIGHTS
- Introduction
- What is the X-Pad Terminal
- Unpacking
- X-Pad Parts
- Charging the Battery
- Figure 3. Battery Installation and Removal
- Battery Installation and Removal
- 1. Insert the battery, bottom end first, into the battery compartment (see Figure 3).
- 2. Carefully press the battery top downward until it clicks into place. When X-Pad is powered by ...
- 1. Turn the X-Pad off by holding the Power button pressed (see Figure 1), for at least four seconds.
- 2. Press the Release Buttons on the battery sides (see Figure 3) and pull away the battery from t...
- The Universal Office Dock (UOD) Unit
- First Time Battery Charge
- Routine Battery Charge
- Battery Maintenance
- Battery Storage
- Extending Battery Life
- Using the X-Pad
- Maintaining the X-Pad
- Accessories
- Troubleshooting
- Safety Instructions
- SPECIFICATIONS
1
Introduction
Motorola congratulates you on your purchase of the X-Pad Handheld Data
Terminal! Its unique functionality and features make this state-of-the-art
rugged Personal Digital Assistant (PDA) superior for use in a wide range of
applications.
This manual covers the basic setup operations and use of the X-Pad termi-
nal. Since your X-Pad applications are designed by your company or orga-
nization, this manual does not cover any of the software applications
resident in your X-Pad. For software applications description, refer to the
specific application manual or contact your company or organization repre-
sentative for instructions.
The X-Pad uses a Universal Office Dock (UOD) unit for power charge and
wire communication. Note that this manual briefly mentions the UOD. For
detailed installation and operation of the UOD, refer to UOD User Manual,
Motorola P.N. 98-08901C59.