Owner's Manual
Table Of Contents
- COMPUTER SOFTWARE COPYRIGHTS
- Introduction
- What is the PowerPad Terminal
- Unpacking
- Charging the Battery
- Figure 3. Battery Installation and Removal
- Battery Installation and Removal
- 1. Insert the battery, bottom end first, into the battery compartment (see Figure 3).
- 2. Carefully press the battery top downward until it clicks into place. When PowerPad is powered ...
- 1. Turn the PowerPad off by holding the Power button pressed (see Figure 1), for at least four se...
- 2. Press the Release Buttons on the battery sides (see Figure 3) and pull the away battery from t...
- The Universal Office Dock (UOD) Unit
- First Time Battery Charge
- Routine Battery Charge
- Battery Maintenance
- Battery Storage
- Extending Battery Life
- Using the PowerPad
- Maintaining the PowerPad
- Accessories
- Troubleshooting
- Safety Instructions
- SPECIFICATIONS
2 - Index
P
PocketPC 2003 Menu
14
Power Button 13
Power Level Indicator 9
PowerPad Parts 4
R
Remove Battery
6
Reset hole 17
Resetting 16
resume operation 11
room temperature 8
S
Safety
3
Safety Instructions 21
scan 1D 15
Scan Angle 15
SCAN trigger 15
Scanning 15
Screen Calibration 14
SHIFT Key 13
Slot LEDs 7
Solid Amber 8
Solid Green 8
Solid Red 8
Speaker 4
storage temperatures 9
store 17
Suspend Mode 11
T
TEST pad
9
Touch Sensitive Screen 4
Troubleshooting 19
Turning Off 11
Turning On 11
U
Universal Office Docking
7
Unpacking 3
UOD User Manual 1
Up Key 13
V
Virtual Keyboard
14
W
Warm Reset
16